Sale!
 

Monitor Audio Bronze 5 5.1 AV Package

KSh280,000.00

Bronze 5 Specification

System Format 2 1/2 Way
Frequency Response
(-6dB – IEC 268-13)
37Hz – 30kHz
Sensitivity 1W@1m 90dB
Maximum S.P.L.
(1dBA @ 1m – each)
113.8dBA (pair)
Nominal Impedance 8 Ohm
Power Handling – R.M.S. 120W
Recommended Amp Requirements 30 – 120W
Cabinet Design Dual chamber bass reflex
Ported front and rear
HiVe II Port technology
Drive Unit Complement 1 x 5 1/2″ C-CAM bass driver
1 x 5 1/2″ C-CAM mid-range driver
1 x 25mm gold dome C-CAM tweeter
Crossover Frequency LF: -6dB @ 600Hz
MF/HF: 2.8kHz
Cabinet Dimensions
(H x W x D)
850 x 165 x 248mm
(33 7/16 x 6 1/2 x 9 3/4″)
Complete Dimensions
inc grille, terminals, plinths & spikes
(H x W x D)
898 x 215 x 282mm
(35 3/8 x 8 7/16 x 11 1/8″)
Weight
(each)
11kg
(24lb 6oz)

Bronze Centre Specification

System Format 2 Way
Frequency Response 60Hz – 30kHz
Nominal Impedance 8 Ohm
Maximum SPL (dBA @1M – each) 113dBA
Power Handling R.M.S. 120W
Recommended Amplifier Requirements 20-120W
Cabinet Design Sealed Cabinet
Drive Unit Complement 2 x 5 1/2″ C-CAM bass mid-range driver
1 x 25 mm gold dome C-CAM® tweeter
Crossover Frequency 3.0kHz
Cabinet Dimensions
(H x W x D)
165 x 460 x 165 mm
6 1/2 x 18 1/8 x 6 1/2 inches
Complete Dimensions
inc grilles & terminals
(H x W x D)
165 x 460 x 193 mm
6 1/2 x 18 1/8 x 7 5/8 inches
Weight
(Individual)
5.6kg
(12lbs 6oz)

Bronze FX Specification

System Format 2 Way
Frequency Response 65Hz – 30kHz
Sensitivity (1W@1M) 88dB
Nominal Impedance 8 Ohm
Maximum SPL (dBA @1M) 110dBA (pair)
Power Handling R.M.S. 80W
Recommended Amplifier Requirements 20-80W
Cabinet Design Sealed Cabinet
Drive Unit Complement 1 x 5 1/2″ C-CAM bass mid-range driver.
2 x 25 mm gold dome C-CAM® tweeter
Crossover Frequency 2.8kHz
Cabinet Dimensions
(H x W x D)
274 x 276 x 105 mm
(10 13/16 x 10 7/8 x 4 1/8 inches)
Complete Dimensions inc grilles & bracket
(H x W x D)
274 x 281 x 118 mm
(10 13/16 x 11 1/6 x 4 5/8 inches)
Weight (Individual) 3.2kg (7lbs)

W10 Subwoofer Specification

Low Frequency Limit 30Hz
Upper Frequency Limit 40-120Hz (Variable Low Pass filter)
Low Pass Filter Alignment 12dB/ Octave variable + 12dB/ Octave Fixed @ 150Hz
Amplifier Output 220W R.M.S
Amplifier Classification Class D with Switch mode PSU
Drive Unit Complement 1 x 10″ C-CAM Long throw subwoofer driver + 1 x 10″ flat panel ABR
External Dimensions: (H x W x D) 320 x 320 x 330 mm
12 5/8 x 12 5/8 x 13 inches
(364 x 320 x 364 mm14 5/16 x 12 5/8 x 14 5/16 inches inc grille amp & feet)
Input Impedance 20kO
Standby power consumption 0.5W (ErP approved)
Mains Input Voltage 110-120Vac – 50-60Hz
220-240Vac – 50-60Hz
Electronic auto-select
Weight 12.9kg (28lb 6oz)
 

Description

The New Bronze Range

 

New Bronze Five

Monitor Audio Bronze 5 Speakers

The slender Bronze Five delivers powerful, responsive bass lines that belie its stealthy appearance and surpass those of many much larger towers. Its 5½” C-CAM bass driver and 5½” C-CAM bass/mid driver are arranged in a two and half way system configuration, operating in separate acoustic chambers with front and rear firing HiVe II ports to provide differential tuning for higher efficiency and greater low frequency extension. The Bronze Five’s low-distortion architecture expertly combines clean, expressive mid and high frequencies with punchy room-filling bass lines delivering a naturally rhythmic and addictive blend of large-scale dynamics and detail from a surprisingly unobtrusive tower.

– New C-CAM gold dome tweeter
– 5½” bass driver and 5½” bass/mid-range with concave ‘dished’ C-CAM cone profiles
– Two-and-a-half way configuration with differentially-tuned acoustic system for higher efficiency and improved low frequency extension
– HiVe II port technology
– Single bolt-through driver systems for increased overall bracing, rigidity and driver/baffle de-coupling
– High quality crossovers with premium grade Polypropylene film capacitors used throughout
– Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
– Invisible magnetic grille fixing
– Floor-level terminal panel for easy termination and neat cable access. Bi-wire/ Bi-amp terminal configuration
– Premium quality vinyl veneer finishes.

 

New Bronze Centre

Monitor Audio Bronze Centre Speaker

By sharing the New Bronze acoustic and aesthetic design ethos, the compact Bronze Centre is the natural partner for Bronze left/right speakers in a home theatre LCR array. It features twin 5½” C-CAM bass/mid-range drivers straddling a Bronze C-CAM tweeter for pin-point synergy with its satellite partners producing seamless front soundstage action and articulate dialogue.

– New C-CAM gold dome tweeter
– Dual 5½” bass/midrange drivers with concave ‘dished’ C-CAM cone profile
– Two-way M-T-M (D’Appolito) configuration in a sealed cabinet for accurate performance close to a wall or in restricted voids
– Single bolt-through driver systems, for increased overall bracing, rigidity and driver/baffle de-coupling
– High quality crossovers with premium grade Polypropylene film capacitors used throughout
– Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
– Invisible magnetic grille fixing
– Acoustically matched to Bronze speaker systems for excellent imaging and consistency of timbre in surround applications
– Premium quality vinyl veneer finishes.

 

New Bronze FX

Monitor Audio Bronze FX Surround Speakers - Black Oak

Monitor Audio Bronze FX Speaker

Developing the perfect mix of reverberant or direct surround sound in a Bronze home cinema system, the wall-hugging New Bronze FX surround speaker will combine seamlessly with front channels to establish the immersive audio experience essential to successful home theatre design. Matched acoustically and aesthetically with its LCR counterparts, its angled-baffle cabinet can be flush-mounted on side or rear walls, and its dispersion characteristics changed at the flick of a switch to accommodate the precise requirements for di-pole (diffuse) or bi-pole (direct) operation. Flanking a single 5½” C-CAM bass/mid driver, dual C-CAM gold dome tweeters are mounted on angled side-panels, helping to create a wider, more enveloping and convincing surround sound-field.

– Angled baffles to create a wider spread of sound for improved surround effects
– Optimised for di-pole or bi-pole operation by the simple flick of a switch located on the rear terminal panel
– New C-CAM gold dome tweeter design
– 5½” bass/mid-range driver with concave ‘dished’ C-CAM cone profile
– Single bolt-through driver system, for increased overall bracing and rigidity
– High quality crossovers with premium grade Polypropylene film capacitors used throughout
– Acoustically matched with all other Bronze speakers for excellent imaging and timbre consistency in surround applications.

 

 

New Bronze ‘W10’ Subwoofer

Monitor Audio Bronze W10 Subwoofer

All the audiophile-like transparency of New Bronze’s low-distortion design regimen concentrated in the bass domain. This is New Bronze bass, deeply provisioned, authentically proportioned and dynamically fleet of foot, re-tooled from the ground up to punctuate the sound of every New Bronze system with stunningly natural bass transients, timed to perfection. The sophisticated W10 subwoofer is a New Bronze original, featuring an exclusive trinity of uprated amplifier topology, powerful DSP processing and new long-throw driver design. Advanced switch-mode power conversion techniques, custom DSP tuning and a massive power reservoir combine to generate enormous dynamic headroom from the Class D power-pack, allowing the driver to drop low and punch hard without distortion for a truly sensational deep bass experience. A down-firing 10” ABR (Auxiliary Bass Radiator) ensures that with the same compact footprint as its predecessor, the W10 delivers an incredible 6dB greater SPL at 40Hz. Choose how you enjoy the W10’s prodigious bass energy with pre-set EQ settings for music, movie or impact.

– Ultra long throw 10” driver featuring concave ‘dished’ C-CAM cone. Increase magnet motor size to deliver higher output and improved control
– 10” flat panel ABR(auxiliary bass driver) mounted on the bottom to augment low frequency extension and power handling
– Powerful Class-D Amplifier delivering over 200W with low distortion
– Switch Mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
– DSP processing with all control features and crossover performed in the digital domain
– Three pre-set EQ mode settings (Music, Movie, Impact)
– 12volt trigger – provides switching control from AV amp, processor or home automation control system
– 18mm thick MDF construction
– Heavy cabinet bracing applied to provide stiff, low resonance cabinet
– Premium quality vinyl veneer finishes.

 

Reviews

There are no reviews yet.

Be the first to review “Monitor Audio Bronze 5 5.1 AV Package”

Your email address will not be published. Required fields are marked *