Yamaha A-S501 Black Stereo Amplifier

KSh95,000.00

Expand your listening horizons with the black A-S501 Integrated Amplifier from Yamaha. Featuring up to 100W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray/DVD players. It offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there’s also a terminal for connecting a subwoofer.

To reduce distortion and degradation and produce the cleanest possible sound, the A-S501 employs Pure Direct Mode. Activated via a button on the front of the unit, this mode causes input signals to bypass unused circuits and cuts off those circuits’ power supply. To further ensure quality sound, the amplifier’s continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.

This Yamaha amplifier was built with energy efficiency in mind, and uses a power management system to switch itself to idle mode when not in use. The A-S501’s internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.

Categories: ,
 

Description

Yamaha A-S501 Specs

System
RMS Output Power6 Ohms, 20 Hz to 20 kHz, 0.038% THD: 100 W + 100 W
8 Ohms, 20 Hz to 20 kHz, 0.019% THD: 85 W + 85 W
Dynamic Power per Channel8 Ohms: 130 W
6 Ohms: 150 W
4 Ohms: 185 W
2 Ohms: 220 W
Power Bandwidth0.04% THD, 42.5 W, 8 Ohms: 10 Hz to 50 kHz
Damping Factor1 kHz, 8 Ohms: ≥240
Input Sensitivity/ImpedancePhono (MM): 3.0 mV / 47 kOhms
CD, etc.: 200 mV / 47 kOhms
Maximum Input VoltagePhono (MM) (1 kHz, 0.03% THD): ≥45 mV
CD, etc. (1 kHz, 0.5% THD): ≥2.2 V
Output Level and ImpedanceRec Out: ≤200 mV / 1.0 kOhms
Subwoofer Out (Cut-Off Frequency: 100 Hz): 3.5 V / 1.2 kOhms
Headphone Output ImpedanceCD, etc. (Input 1 kHz, 200 mV, 8 Ohms): 430 mV / 470 ohms
Frequency ResponseWith Pure Direct: 20 Hz to 20 kHz, 0±0.5 dB
Without Pure Direct: 10 Hz to 100 kHz, 0±1.0 dB
RIAA Equalization Deviation±0.5 dB
Total Harmonic Distortion (THD)Phono (MM) to Rec Out (20 Hz to 20 kHz, 2.5 V) ≤0.03%
CD, etc. to Speakers (20 Hz to 20 kHz, 45 W, 8 Ohms): ≤0.019%
Signal-to-Noise RatioPhono (MM) (5 mV Input Shorted): ≥82 dB
CD, etc., with Pure Direct On (200 mV Input Shorted): ≥99 dB
Residual Noise40 μV (IHF-A Network)
Channel SeparationCD, etc. (5.1 kOhms Input Shorted, 1 kHz): 65 dB or more
CD, etc. (5.1 kOhms Input Shorted, 10 kHz): 50 dB or more
Tone ControlBass
Boost/Cut (20 Hz): ± 10 dB
Turnover Frequency: 400 Hz
Treble
Boost/Cut (20 kHz): ± 10 dB
Turnover Frequency: 3.5 kHz
Loudness ControlAttenuation (1 kHz, Continuous): -30 dB
Digital Audio FormatPCM (2-channel), 192/176.4/96/88.2/48/44.1/32 kHz
PCM Word Depth24-bit / 16-bit
Connectors
Input5 x RCA
1 x Phono for turntable
1 x Optical
1 x Coaxial
Output2 x RCA
4 x Speaker terminal
1 x Subwoofer
1 x Headphone
1 x DC (accessory power)
TerminalsGold-plated RCA (CD, phono, coaxial) and speaker terminals
General
Cabinet (Chassis)Design: Reinforced with solid center bar
Finish: Brushed aluminum
Power Supply120 VAC, 60 Hz
Power ConsumptionIn Use: 240 W
Maximum: 510 W
Standby: 0.5 W
Capacitors12,000 μF block capacitors
Dimensions (W x H x D)17.1 x 5.9 x 15.2″ (43.5 x 15.1 x 38.7 cm)
Weight22.7 lb (10.3 kg)
Packaging Info
Package Weight26 lb
Box Dimensions (LxWxH)21 x 8.5 x 7.5″

Reviews

There are no reviews yet.

Be the first to review “Yamaha A-S501 Black Stereo Amplifier”

Your email address will not be published. Required fields are marked *