Roland AIRA VT-4 Voice Transformer Kit with Condenser Mic and Cable

KSh118,000.00

Roland AIRA VT-4 Voice Transformer Specs

Physical
Connectors
Mic In (Rear): 1 x combo XLR-1/4″ / 6.3 mm
Mic In (Front): 1 x 1/8″ / 3.5 mm TRS (plug-in power)
Phones: 1 x 1/8″ / 3.5 mm TRS
Line Out: 2 x 1/4″ / 6.3 mm
USB Port: 1 x USB Type B
MIDI In: 1 x 5-pin DIN
Phantom Power
+48 V, 10 mA max
USB
Audio
Nominal Input Level
Mic In: -40 to -12 dBu (variable)
Input Impedance
MIC IN (Rear): 4.4 kOhms
MIC IN (Front): 2.2 kOhms
Nominal Output Level
-10 dBu
Output Impedance
Out: 1 kOhm
Phones: 24 Ohms
Memory
Scene Memory: 8
Controls
Faders
Pitch
Formant
Balance
ReverbKnobs
Volume
Mic Sens
Auto Pitch
Key

Buttons
Robot
Megaphone
Vocoder
Harmony
Manual
Bypass
Memory / Effect Variation x 4

Effect Type
Robot
Normal
Octave-1
Octave+1
FeedbackMegaphone
Megaphone
Radio
BBD Chorus
Strobo

Vocoder
Advanced
VP
Talk Box
Spell Toy

Harmony
+5
+3
+3, -4
+3, +5

Reverb
Reverb
Echo
Tempo Delay
Dub Echo

Indicator Lights
Peak
Signal Processing
PC Interface: 24-bits
AD/DA Conversion: 24-bits
Sampling Frequency
AD/DA Conversion: 44.1, 48, 96, 192 kHz
Power
Power Supply:
4 x Rechargeable Ni-MH battery (AA, HR6)
4 x Alkaline battery (AA, LR6)
USB Bus Power: Obtained via USB port
Current Draw: 500 mA
Battery Life
Alkaline Battery (phantom power: Off): Approx. 6 hours
Alkaline Battery (phantom power: On): Approx. 4 hours
Rechargeable Ni-MH Battery (phantom power: Off): Approx. 7 hours
Rechargeable Ni-MH Battery (phantom power: On): Approx. 5.5 hours
Dimensions
6.9 x 5.2 x 2.3″ / 174 x 133 x 58 mm
Weight
19.5 oz / 554.0 g
Packaging Info
Package Weight
2.2 lb
Box Dimensions (LxWxH)
10.1 x 8.05 x 4″

Polsen PCR-65 Cardioid Condenser Microphone Specs

Key Specs
Element Type
Electret Condenser
Polar Pattern
Cardioid
Frequency Range
20 Hz to 20 kHz
Maximum SPL
Cardioid: 125 dB SPL
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Microphone
Sound Field
Mono
Element Type
Electret Condenser
Diaphragm
1″ / 25.40 mm
Polar Pattern
Cardioid
Circuitry
Solid-State
Pad
No
High-Pass Filter
No
Performance
Frequency Range
20 Hz to 20 kHz
Maximum SPL
Cardioid: 125 dB SPL
Impedance
Cardioid: 200 Ohms
Sensitivity
Cardioid: -32 dB at 1 kHz
Equivalent Noise Level
Cardioid: 20 dB A-Weighted
Connectivity
Analog Output
1x XLR 3-Pin
Power
Power Sources
Phantom Power
Operating Voltage
12 to 52 V
Physical
Dimensions
ø: 2 x L: 5.7″ / ø: 50.8 x L: 144.78 mm
Weight
12.5 oz / 354.38 g
Packaging Info
Package Weight
1.675 lb
Box Dimensions (LxWxH)
12.1 x 8.4 x 3.3″

Kopul Premium Performance 3000 Series Neutrik XLR Male To XLR Female Microphone Cable (6′, Black) Specs

Connector 1
1x XLR 3-Pin Male Straight
Connector 2
1x XLR 3-Pin Female Straight
Cable Length
6′ / 1.8 m
Connector Brand
Neutrik
Contact Plating
Silver
Wire Gauge
24 AWG
Shielded
Yes
Color
Black
Packaging Info
Package Weight
0.385 lb
Box Dimensions (LxWxH)
9.1 x 8.25 x 0.9″
Categories: ,
 

Description

This Kit combines the Roland AIRA VT-4 Voice Transformer with a high-quality large-diaphragm cardioid condenser microphone and an XLR cable to create a real-time vocal processing solution, well suited for studio production, live performance, podcasts, gaming, web streaming, broadcast, and more.

Roland AIRA VT-4 Voice Transformer

The Roland AIRA VT-4 Voice Transformer is a real-time vocal processor designed to craft and shape your own custom vocal sounds, from subtle augmentation to radical transformation. Smoothly alter the pitch and formant of a voice or add heavily processed vocal effects to your studio work, stage performances, podcasts, web streaming, and more. All controls are conveniently located from the front panel allowing you to make quick adjustments without menu diving or programming. Create remarkable effects such as harmonizing, vocoding, pitch shifting, hard tuning, and more. Dramatically change your entire persona from male to female, big to small, or good to evil.

For controls, the unit features dedicated pitch, formant, balance, and reverb sliders. A center wheel provides auto-pitch features, while the dedicated robot, megaphone, vocoder, and harmony buttons allow you to mix and match effects. Each effect has a selection of one-touch variations, so you can get different vocoder characteristics, various lo-fi effects, multi-part harmonies, and distinct kinds of reverb and delay. Chain your effects, set the controls just how you like them, and then simply hold down a preset button to save that scene for later. Up to eight scenes can be saved for instant recall. Changing presets and tweaking controls is smooth and immediate, with no jarring artifacts, glitches, or dropouts.

For I/O, a rear panel features a combo XLR-1/4″ connector with switchable +48V phantom power for use with your favorite condenser microphone. Outputs are provided by a pair of 1/4″ TRS connectors which can be configured as either mono/stereo or separate wet/dry channels. A built-in USB audio interface with adjustable volume level provides loopback recording to overdub vocals on existing tracks. Power is provided by either the computer’s USB bus or via the four included AA batteries.

Effect Descriptions
  • Robot: Produces an expressionless voice with a fixed pitch, evocative of a robot
  • Megaphone: Produces a distorted voice, as though you were using a megaphone
  • Vocoder: Produces a vocoder voice
  • Harmony: Lets you add harmony to the sound
  • Auto Pitch: Pitch-corrects your voice
  • Key: Specifies the key that is used when applying an effect with the Robot button or the Auto Pitch knob
  • Pitch: Adjusts the pitch of the voice
  • Formant: Adjusts the formants of the sound
  • Balance: Adjusts the balance between the normal voice  and the effect-processed voice
  • Reverb: Adjusts the amount of reverb
Effect Types
  • Robot
    • Normal
    • Octave-1
    • Octave+1
    • Feedback
  • Megaphone
    • Megaphone
    • Radio
    • BBD Chorus
    • Strobo
  • Vocoder
    • Advanced
    • VP
    • Talk Box
    • Spell Toy
  • Harmony
    • +5
    • +3
    • +3, -4
    • +3, +5
  • Reverb
    • Reverb
    • Echo
    • Tempo Delay
    • Dub Echo
Polsen PCR-65 Cardioid Condenser Microphone

The PCR-65 from Polsen is a cardioid condenser microphone designed for full-range reproduction of vocals and instruments in podcasts, recording studios, and broadcast environments. Its side-address, pressure-gradient design utilizes a large 1″ diaphragm with a cardioid polar pattern, which minimizes the pickup of off-axis sounds and impedes feedback. The microphone boasts a 20 Hz to 20 kHz frequency response, allowing it to accurately transduce the frequencies of a variety of sounds. Its high sensitivity and 125 dB maximum SPL ensure that you can use it on quiet or loud sources, from whispered vocals to pounding drums.

The PCR-65 has a sturdy, metal housing with an alloy finish. The supplied custom shockmount decouples the mic from vibrations and rumble that would otherwise transfer from the floor to the mic. Use the desktop tripod stand for convenient tabletop placement during interviews and podcasts. Phantom power (12 to 52 VDC) is required.

Cardioid Capsule
The 1″ capsule’s cardioid polar pattern is least sensitive to sound behind the microphone, allowing better rejection of room reflections, which is ideal for capturing vocals and close-miked instruments with greater clarity
Full-Range Frequency Response
The 20 Hz to 20 kHz frequency response is sufficiently wide to deliver a warm, natural sound for a variety of sources, from the low drone of a double bass to the high shimmer of cymbals to the powerful presence of a vocal
High Sensitivity and Maximum SPL
The microphone’s high sensitivity allows it to be used on quiet sources such as a soft voice, without extreme gain, and its high maximum SPL of 125 dB ensures that it can handle loud sounds such as a drum, without distortion
Sturdy and Durable
Metal construction with an alloy finish enables the mic to hold up to the demands of studio and stage environments
Versatile
The supplied shockmount, which decreases pickup of rumble and vibrations, can be mounted on a standard mic stand or the included desktop tripod
Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (6′, Black)

The black Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (6′) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable’s color-coding affords the ability to quickly differentiate between multiple connections onstage, it provides a pleasant aesthetic quality at the same time.

Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that’s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

95% dual-spiral shielding offers protection from EMI and RFI noise
Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable’s signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable’s core
24-AWG oxygen-free stranded copper inner core provides the best possible conductivity
Cotton yarn reduces electrostatic and microphonic noise
All solder points shrink-wrapped for protection
Neutrik XX silver connectors offer high conductivity
Caged type contact and improved ground contact

Reviews

There are no reviews yet.

Be the first to review “Roland AIRA VT-4 Voice Transformer Kit with Condenser Mic and Cable”

Your email address will not be published. Required fields are marked *