Marantz NR1711 7.2-Channel Network A/V Receiver with HEOS

KSh115,000.00

Marantz NR1711 Specs

Amplifier
Channels 7.2
Power Output per Channel 2-Channel Driven:
50 W at 8 Ohms / 20 Hz to 20 kHz / 0.08% THD
70 W at 6 Ohms / 1 kHz / 0.7% THD
1-Channel Driven:
100 W at 6 Ohms / 1 kHz / 10% THD
Frequency Response 10 Hz to 100 kHz +1/-3 dB (Direct Mode)
Speaker Impedance 4 to 16 Ohms
Audio Processing
DTS Compatibility DTS-HD Master Audio, DTS:X
Dolby Compatibility Dolby Atmos, Dolby TrueHD
Auro 3D Support No
Upmixing Technology Dolby Surround, DTS Neural:X, DTS Virtual:X, Dolby Atmos Height Virtualization Technology
Supported File Formats AAC, ALAC, DSD, FLAC, MP3, WAV, WMA via Network
Video
HDR Compatibility HDR10, HDR10+, Dolby Vision, Hybrid Log Gamma
Pass-Through Support 8K60p 4:4:4 (BT.2020)
Upscaling 8K UHD
GUI Yes
Connectivity
Rear A/V Inputs 6 x HDMI
1 x Optical TOSLINK
1 x Digital Coaxial
2 x 3RCA Component
3 x RCA Composite
3 x Stereo RCA
1 x Stereo RCA (Phono) with Ground Screw
Rear A/V Outputs 1 x HDMI
1 x 3RCA Component
1 x RCA Composite
1 x Stereo RCA
2 x RCA Subwoofer Pre-Out
Front I/O 1 x USB Type-A Input
1 x 1/4″ / 6.35 mm Headphone Output
1 x 1/8″ / 3.5 mm Setup Mic Input
Other Rear I/O 2 x Bluetooth/Wi-Fi Antenna Terminal
1 x RJ45 (Ethernet)
1 x 1/8″ / 3.5 mm (12 V Trigger) Output
1 x 1/8″ / 3.5 mm (IR) Input
1 x RCA (Remote) Input
1 x RCA (Remote) Output
1 x AM Antenna Terminal Input
1 x FM Antenna Terminal Input
Speaker Connectors 7 x Binding Post Pairs
HDCP Support Version 2.3
HDMI Compression Modes Not Specified by Manufacturer
Audio Return Channel (ARC) Yes, eARC
HDMI CEC Yes
Media Card Slot None
A/B Speaker Selection Yes
Bi-Amp Capability Yes
Input Sensitivity 130 mV
Phono: 2.5 mV
Signal to Noise Ratio 98 dB (Direct Mode / IHF-A)
Phono: 74 dB (IHF-A)
Total Harmonic Distortion (THD) Phono: 0.03%
Wireless Connectivity
Wi-Fi Wi-Fi 4 (802.11n); Dual-Band (2.4 & 5 GHz)
Wireless Security AES, TKIP, WEP 128, WEP 64, WPA, WPA-PSK
Bluetooth 4.2
Bluetooth Profiles A2DP 1.2, AVRCP 1.5
Supported Audio Codecs SBC
Bluetooth Range 98.4′ / 30 m
Wireless Audio Protocols AirPlay 2, HEOS
DLNA Support Yes
Control
External Control Support Domotz Pro, OvrC
Virtual Assistant Support Amazon Alexa, Apple Siri, Google Assistant, Josh.ai
Tuner Section
Tuner Type AM, FM
Radio Frequencies AM: 520 to 1710 kHz
FM: 87.5 to 107.9 MHz
Sensitivity AM Effective: 18 µV
FM Effective: 1.2 µV / 12.8 dBf
Signal to Noise Ratio FM:
67 dB (Direct Mode / IHF-A / Stereo)
70 dB (Direct Mode / IHF-A / Mono)
Power
AC Input Power 120 VAC, 60 Hz
Power Consumption Active: 250 W
No Sound (ECO Off): 40 W
No Sound (ECO On): 30 W
Network Standby: 2.7 W
CEC Standby: 0.5 W
Standby: 0.2 W
Physical
Dimensions (W x H x D) 17.3 x 6.9 x 14.9″ / 43.9 x 17.5 x 37.8 cm (Antenna Up)
17.3 x 4.1 x 14.9″ / 43.9 x 10.4 x 37.8 cm (Antenna Down)
17.3 x 4.1 x 14.5″ / 43.9 x 10.4 x 36.8 cm (Antenna Removed)
Weight 18.5 lb / 8.4 kg
Warranty Length Limited 3-Year Warranty
Packaging Info
Package Weight 23.5 lb
Box Dimensions (LxWxH) 20.5 x 19.5 x 7.5″
Categories: ,
 

Description

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Enjoy surround sound with voice control and internet streaming with the Marantz NR1711 7.2-Channel Network A/V Receiver. It delivers up to 50W of power per channel at 8 ohms and features built-in Bluetooth, AirPlay 2, and HEOS support, allowing you to wirelessly stream music from compatible sources, such as smartphones and tablets. Onboard Wi-Fi and Ethernet connectivity allows the NR1711 to access a variety of internet-based music sources. The receiver can be voice-controlled via your Amazon Alexa, Google Assistant, or Siri ecosystem.

The NR1711 supports the Dolby Atmos and DTS:X object-based audio formats, as well as simulated formats like Dolby Atmos Height Virtualization Technology and DTS Virtual:X. More traditional surround formats like DTS HD Master, Dolby TrueHD, and Dolby Surround are also supported.

With six HDMI inputs, this receiver can act as a video switcher for your HD source components. It will pass through 8K and 4K UHD signals along with the HDR10, HDR10+, HLG, and Dolby Vision HDR formats to your compatible display. The receiver also has a USB port for accessing media stored on USB flash drives. Audyssey MultEQ sound calibration will fine-tune the receiver to your speakers and room setup for a tailored listening experience.

Note:

Access to certain Internet-based content may require a subscription to a service.

7-Channel Discrete Power

The NR1711 features a high-current discrete power amplifier section with identical power on all seven channels and low-impedance drive capability for enhanced speaker control. Auto Eco Mode is designed to adjust power output to speakers based on the volume level without sacrificing sound quality, and an on-screen eco meter shows you power consumption in real time.

Slim Profile

At roughly half the height of traditional A/V receivers, the NR1711 is engineered to deliver musical sound.

8K HDMI Support

In addition to 8K UHD upscaling, all six HDMI inputs support Dolby Vision, HLG, HDR10, 4:4:4 Pure Color sub-sampling, 21:9 video, BT.2020 pass-through, CEC, and HDCP 2.3 copy protection. One dedicated 8K HDMI input provides 8K/60 Hz picture quality for enhanced clarity and contrast. The receiver also provides a virtually lag-free gaming experience with 4K/120 Hz pass-through, ALLM, VRR, and QFT support.

eARC for Object-Based Audio from TV Apps

The eARC-compatible HDMI output transmits uncompressed and object-based audio formats like Dolby Atmos and DTS:X directly from apps in your compatible TV, allowing just one cable to run from the receiver to the TV.

Additional Features

  • Multichannel stereo
  • EI power transformer
  • Pure Direct
  • Audyssey MultEQ sound optimization
  • Audyssey Dynamic EQ & Dynamic Volume
  • Audyssey app support
  • Dual speaker setup presets
  • MCAX2 Compressed Audio Enhancer
  • HEOS multiroom and streaming
  • DSD audio streaming up to DSD 5.6
  • FLAC HD 192/24
  • WAV 192/24
  • FLAC, WAV, ALAC, and DSD gapless playback
  • AirPlay 2
  • Roon Tested
  • TuneIn internet radio
  • Spotify Connect, Tidal, Deezer, Amazon Prime Music, Pandora, and more streaming services
  • Remote app for Android, iOS, and Kindle
  • Bluetooth headphone transmission
  • HDMI pass-through in standby mode
  • TV Sound grouping
  • Two Multi-Room Zones
  • Main room multichannel audio – Zone stereo downmix
  • Speaker or pre-out zone audio output
  • Web browser setup
  • Marantz Remote Bus
  • Voice control via Amazon Alexa, the Google Assistant, and Apple Siri
  • One-line FL display
  • ISF Certification
  • Nine GUI languages
  • Setup Assistant
  • Smart Select
  • Firmware updates via network or USB
  • Variable crossover
  • Optimized Bass Redirection
  • Auto Power Off
  • Sleep & timer
  • Multichannel Pre Out (2.2)
  • Speaker A/B assignable
  • Bi-Amp Drive assignable
  • Multiroom Speaker Terminal assignable
  • USB Audio and iOS device charging
  • FM tuner with RDS
  • 70% Guarantee

Reviews

There are no reviews yet.

Be the first to review “Marantz NR1711 7.2-Channel Network A/V Receiver with HEOS”

Your email address will not be published. Required fields are marked *