Audioengine A2+ Wireless Bluetooth Speaker System (Satin Black, Pair)


Audioengine A2+ Specs

Speaker System
Speaker Configuration 2-Way
Amplifier Power Rating 30 W RMS
60 W Peak
Drivers 1 x 0.75″ / 20 mm Silk Dome Tweeter (per Speaker)
1 x 2.75″ / 69.85 mm Woven Aramid-Fiber/Kevlar Woofer (per Speaker)
Frequency Response 65 Hz to 22 kHz
Magnetic Shielding Yes
Wired Connectivity Left:
1 x Stereo RCA Output
1 x Binding Post Pair Output
1 x Stereo RCA Input
1 x 1/8″ / 3.5 mm Input (Audio)
1 x Binding Post Pair Input (from Other Speaker)
Amplifier Class 2 x Class-AB
SNR (Signal-to-Noise Ratio) 95 dBA
THD (Total Harmonic Distortion) < 0.05%
Input Impedance 5 Kilohms
Wireless Connectivity
Wireless Connection Protocols Bluetooth
Bluetooth 5.0
Wireless Range 100′ / 30 m
Supported Audio Codecs AAC, SBC, aptX HD, aptX LL
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Supported Sample Rates Up to 48 kHz / 16-Bit
Placement & Mounting Options Tabletop/Bookshelf
1/4″-20 Female, Floorstanding (with Optional Hardware)
Cabinet Material MDF
Operating Temperature 32 to 95°F / 0 to 35°C
Storage Temperature -4 to 113°F / -20 to 45°C
Operating Humidity 5 to 95%
Dimensions 4 x 6 x 5.2″ / 10.2 x 15.2 x 13.3 cm
Weight Left:
3.5 lb / 1.6 kg
3.1 lb / 1.5 kg
Packaging Info
Package Weight 9.72 lb
Box Dimensions (LxWxH) 15 x 11 x 7.2″


Designed to connect to virtually any device, the satin black Audioengine A2+ Wireless Bluetooth Speaker System provide an analog RCA stereo input, 1/8″ input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75″ woofer and a 0.75″ tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

Wireless Connectivity

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100′ with virtually no degradation in audio quality.

Designed for Enhanced Bass

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

Simple, Quick Setup

There’s no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

Engineered for Lower Power Consumption

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

Designed for Efficiency

With all the electronics built into the left speaker, it’s easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

Driver Design

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Magnetic Shielding

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

Additional Features

  • Integrated CSR8670 DAC
  • Output current limiting, thermal over-temperature, and power on/off transient protection
  • RCA and 1/8″ inputs provide easy connection to nearly any audio source, including a turntable or TV
  • Variable RCA output for subwoofer connection
  • 0.75″ thick MDF cabinets
  • 1/4″-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts


There are no reviews yet.

Be the first to review “Audioengine A2+ Wireless Bluetooth Speaker System (Satin Black, Pair)”

Your email address will not be published. Required fields are marked *